List view Thumbnail view

Pullers, extractors

External and internal bearing pullers with 2 and 3 arms, extractors for ball joint and rodhead, insertions for rear axle rubber mounting, extractors for ball bearings, puller sets for bearing, swingarm strainers.

Ball joint and silent block remover/installer set MG50042

Ball joint and silent block remover/installer set MG50042

Suitable for any passenger car, utility trucks and SUV vehicles, in which the ball joints have an interference fit. The tools allow for easy removal and installing without large-scale demounting.

Promotion
-20 %
September 18 - September 25, or until the stock lasts
Add to Cart
Order now!
Net price: 104.84 € 83.87 €
Gross price: 127.91 € 102.33 €
In stock!

Ball joint separator, 18mm, two-staged, max. size 50mm MG50032

Ball joint separator, 18mm, two-staged, max. size 50mm MG50032

Ball joint/tie rod end separator, opening 18mm, two-staged, max. size 50mm

Promotion
-20 %
September 18 - September 25, or until the stock lasts
Add to Cart
Order now!
Net price: 13.27 € 10.62 €
Gross price: 16.19 € 12.96 €
In stock!

Windshield wiper arm/battery terminal puller, capacity 25-43mm MG50151

Windshield wiper arm/battery terminal puller, capacity 25-43mm MG50151

Windshield wiper arm/battery terminal puller, clamping capacity 25-43mm

Promotion
-20 %
September 18 - September 25, or until the stock lasts
Add to Cart
Order now!
Net price: 9.01 € 7.21 €
Gross price: 11.00 € 8.80 €
In stock!

Wishbone lever tool, sliding type, lockable at 5 points MG50417

Wishbone lever tool, sliding type, lockable at 5 points MG50417

Wishbone lever tool, sliding type, lockable at 5 points

Promotion
-20 %
September 18 - September 25, or until the stock lasts
Add to Cart
Order now!
Net price: 34.58 € 27.67 €
Gross price: 42.19 € 33.76 €
In stock!

Bearing and bearing bushing puller tool set, 8-58mm MG50148

Bearing and bearing bushing puller tool set, 8-58mm MG50148

Bearing and bearing bushing puller tool set, capacity 8-11mm, 12-17mm, 13-23mm, 18-23mm, 24-29mm, 30-34mm, 34-38mm, 39-43mm, 44-48mm, 49-53mm, 54-58mm, 3 threaded adapters M6x1.0, M8x1.25, M10x1.5




Net price: 78.84 €
Gross price: 96.19 €
Currently out of stock!

Bearing separator set MG50132

Bearing separator set MG50132

Bearing separator set, capacity 30-50mm, 50-75mm, 2 separators, 1 forcing screw, 4X2 extensions




Net price: 34.09 €
Gross price: 41.59 €
Currently out of stock!

Bearing and bearing bushing puller tool set, 12-32mm MG50140

Bearing and bearing bushing puller tool set, 12-32mm MG50140

Bearing and bearing bushing puller tool set, with slide hammer




Net price: 33.68 €
Gross price: 41.09 €
Currently out of stock!

Universal bearing removing/installing kit, 34-84mm MG50093

Universal bearing removing/installing kit, 34-84mm MG50093

Spindle: M10xP1.5, M12xP1.75, M14xP2.0, M16xP2.0, length/Ø A 44/34, 46/36, 54/44, 56/46, 58/48, 66/56, 68/58, 70/60, 78/68, 80/70, 84/72, B 48/38, 50/40, 52/42, 60/50, 62/52, 64/54, 72/62, 74/64, 76/66mm




Net price: 108.93 €
Gross price: 132.90 €
Currently out of stock!

Ball joint separator tool set, replaceable heads, 20, 22, 24, 27, 30mm MG50436

Ball joint separator tool set, replaceable heads, 20, 22, 24, 27, 30mm MG50436

Ball joint and tie rod separator tool set, capacity 20, 22, 24, 27, 30mm




Net price: 68.68 €
Gross price: 83.79 €
Currently out of stock!

Wheel bearing removal/installation tool kit, 60-85mm MG50158

Wheel bearing removal/installation tool kit, 60-85mm MG50158

Ensure quick and precise wheel bearing removal and installation, without damage to the bearing or wheel hub. Suitable for VW, Audi, Seat, Ford, Opel, BMW models, for 60-85mm bearings.




Net price: 142.54 €
Gross price: 173.90 €
Currently out of stock!

Rear bush installation tool, for VW, Audi MG50412

Rear bush installation tool, for VW, Audi MG50412

Rear bush installation tool, for VW: Golf IV, Bora 1.4, 1.6, 1.8, 2.0, 1.9D (01-03), Audi: A3




Net price: 26.80 €
Gross price: 32.70 €
Currently out of stock!

Universal puller set MG50131

Universal puller set MG50131

Universal puller set, jaw length 100, 200, 250mm




Net price: 110.57 €
Gross price: 134.90 €
Currently out of stock!

Wheel bearing removal/installation tool set 55-88mm MG50075

Wheel bearing removal/installation tool set 55-88mm MG50075

Diminishes the possibility of wheel bearing damage during removal and installation. Sizes (d) 55, 60, 64, 67, 70, 72, 74, 75, 78, 82, 84, 88mm.




Net price: 63.43 €
Gross price: 77.39 €
Currently out of stock!

Front suspension bush tool set for VW MG50351

Front suspension bush tool set for VW MG50351

Ensures easy and safe removal and installation directly in the car, without dismantling. For VW Polo, Audi A2, Skoda Fabia, Seat Cordoba/Altea.




Net price: 44.50 €
Gross price: 54.29 €
Currently out of stock!

Bearing separator set MG50461

Bearing separator set MG50461

Bearing separator set, capacity: 15-58mm, 1 separator, 1 main rod, extensions




Net price: 18.90 €
Gross price: 23.06 €
Currently out of stock!

Universal bushing remover/installer set, 34-72mm, 44-82mm MG50605

Universal bushing remover/installer set, 34-72mm, 44-82mm MG50605

Spindle: M10, M12, M14, M16, inner 34, 36, 38-70, 72mm, outer 44, 46, 48-80, 82mm




Net price: 141.72 €
Gross price: 172.90 €
Currently out of stock!

Bearing separator, 30-50mm MG50132-1

Bearing separator, 30-50mm MG50132-1

Bearing separator, capacity 30-50mm




Net price: 8.76 €
Gross price: 10.69 €
Currently out of stock!

Wheel hub puller set, M12 X 1.5, M14 X 1.5 MG50438

Wheel hub puller set, M12 X 1.5, M14 X 1.5 MG50438

Wheel hub puller set, suitable for VW, Audi, Alfa Romeo, Ford, Citroen, BMW, Mazda, Fiat, Mercedes-Benz, Seat, Opel, Peugeot, Renault, Skoda, Porsche




Net price: 149.92 €
Gross price: 182.91 €
Currently out of stock!

Wheel Bearing tool VW MG50432A

Wheel Bearing tool VW MG50432A

Bearing installation and removal tool for 85mm bearings. Application VW Toureg, Transporter, Multivan & T5




Net price: 85.98 €
Gross price: 104.90 €
Currently out of stock!

Universal bearing removing/installing kit, 34-82mm MG50092

Universal bearing removing/installing kit, 34-82mm MG50092

Spindle: M10, M12, M14, M16, M18, sleeve sizes: Ø82×72, Ø80×70, Ø78×68, Ø76×66, Ø74×64, Ø72×62, Ø70×60, Ø68×58, Ø66×56, Ø64×54, Ø62×52, Ø60×50, Ø58×48, Ø56×46, Ø54×44, Ø52×50, Ø50×40, Ø48×38, Ø46×36, Ø44×34mm




Net price: 155.66 €
Gross price: 189.91 €
Currently out of stock!

Front end service set for Mercedes MG50048

Front end service set for Mercedes MG50048

Front end service set for Mercedes




Net price: 48.02 €
Gross price: 58.59 €
Currently out of stock!

Wheel bearing removal/installing tool set MG50432

Wheel bearing removal/installing tool set MG50432

For the VAG group, wheel hub size 72mm, Audi A2, Skoda Fabia after 2000, VW Polo, Fox after 2005, Seat Ibiza after 2002.




Net price: 85.16 €
Gross price: 103.90 €
Currently out of stock!

Second Generation wheel bearing repairing kit (GEN2) 081220V2

Second Generation wheel bearing repairing kit (GEN2) 081220V2

installation/pull out(GEN 2)for Ford,Land Rover, Mazda,VW, Volvo




Net price: 949.00 €
Gross price: 1 157.78 €
Currently out of stock!

Hidravlični izvlekač injektorjev brez črpalke 185810V2

Hidravlični izvlekač injektorjev brez črpalke 185810V2

Hidravlični izvlekač injektorjev, primeren za skoraj vse velikosti, M14, M16, M17, M20, M25, M27




Net price: 1 569.00 €
Gross price: 1 914.18 €
Currently out of stock!

Front wheel drive kit, 55.5-91mm, axle 380mm MG50405

Front wheel drive kit, 55.5-91mm, axle 380mm MG50405

Sizes(d) 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm, axle 380mm




Net price: 65.73 €
Gross price: 80.20 €
Currently out of stock!

Front suspension bush tool set, for BMW, Mini MG50428

Front suspension bush tool set, for BMW, Mini MG50428

Front suspension bush tool set, for BMW, Mini




Net price: 41.90 €
Gross price: 51.12 €
Currently out of stock!

Second Generation wheel bearing removal/istallation kit (GEN2) 08127500

Second Generation wheel bearing removal/istallation kit (GEN2) 08127500

VW Multivan, Touareg, Transporter second Generation wheel bearingremoval/istallation kit (GEN2) for front and back




Net price: 279.00 €
Gross price: 340.38 €
Currently out of stock!




Net price: 150.74 €
Gross price: 183.91 €
Currently out of stock!

Bearing Puller 105-150mm MG04J1008

Bearing Puller 105-150mm MG04J1008

Applicable to bushes, bearings and toothed wheels. The bearing puller easily removes the part from the shaft. Any kind of bearing can be removed (Diameter 105-150mm )with the bearing roller without damage to the tool or shaft.




Net price: 32.53 €
Gross price: 39.69 €
Currently out of stock!

Bearing separator tool 75-105mm MG04J1007

Bearing separator tool 75-105mm MG04J1007

With this tool you can accurately remove the bearing without damaging it. The clamping jaws can be adjusted in the range of 75-105mm. It is suitable to extend existing inventory of the workshop.




Net price: 14.42 €
Gross price: 17.60 €
Currently out of stock!

Universal Pulley Puller MG04A2240

Universal Pulley Puller MG04A2240

Adjustable clamp size and points, adjustable to sprocket and disc size. The traction arm fits well in the wheel, with 8 clefts in several positions to secure the legs.




Net price: 31.50 €
Gross price: 38.43 €
Currently out of stock!

Bearing splitter 10-30mm MG04J1171

Bearing splitter 10-30mm MG04J1171

The clamp can be adjusted with screws 10-30mm. It is suitable to extend existing inventory. With the scraper you can accurately remove the bearing without damaging it.




Net price: 10.53 €
Gross price: 12.85 €
Currently out of stock!