Engine tools from A to Z. We help you to disassemble an reassemble the engine in moments. There isn’t a part of the engine, which we can’t provide a tool for. Spring compressors, timing belt tension meter, piston ring expander, spark plug, glow plugs, injector nozzle socket sets, chainextractor, engine suspension and so much more. Check out our offer!
Well suited to compressing of hard-to-reach springs, e.g. V engines, adjustable by sliding
For OHV, OHC and CHV engines with overhead valves.
The double scale allows for measurement on any side, the tension is showed in Nm units.
For valve stem seal replacement
Piston ring compressor, height 75mm, diameter 53-175mm
Valve spring compressor tool for motorcycles, scooters and passenger cars. Adapter size 30-27.5mm, 25-23.5mm, 23-21.5mm, 19-16.5mm, 16-13.5mm.
Piston ring expander, clamping capacity 120-160mm
Valve grinder, wooden, with suction cups, sizes: 5/8", 13/16", 1 1/8", 1 3/8"
Piston ring expander, clamping capacity 50-100mm
Piston ring expander, clamping capacity 80-120mm
The kit includes tools for drilling, threading and pulling the electrode. 8 and 10mm candles with the most common sizes, M8x1, M10x1 and M10x1.25 threads.
The valves can be cleaned much faster using the valve grinder. Compressed air driven valve grinding machine with 4 suction cups, 16, 20, 30, 35mm. Continuous speed control 0-3000 rpm, 100 l / min air consumption
It is fitted with 2m tubes Within 1-3 bar. When the performance of the car falls, it is worth checking the turbo charge when it comes to heavy acceleration. Can be connected universally to any type.
1/2" degree wheel
O2 sensor and injector nozzle socket set, 1/2": 29X90mm, 27X82mm (12-point), 22X50mm, 3/8": 7/8"X90mm, 1-1/16"X74mm, 7/8"X80mm, 22X31mm
Belt pulley tool set, torx, size 13, 15, 16, 17, 19mm
O2 sensor and injector nozzle socket set, 8x78mm (12-point): Alfa Romeo, Fiat, Rover, Opel, 27X82mm (12-point), 22x80mm (12lapos), 22x108mm (6-point)
For replacing valve stem seals.
High capacity valve-spring compressor tool, for passenger cars, adjustable rod and arm
Valve stem seal pliers, deep seal driving sockets diameter 10.8-14.8mm, seal driving adapters 5, 5.5, 6, 6.6, 7, 8mm and 3/8"
Piston ring service tool set
High load capacity valve-spring compressor tool set, for passenger cars, adjustable rod and arm
Special wrench for turbocharger, 3/8", 12-pt, size: 12mm
Ignition coils puller set, VW: Bora, Golf, new Beetle, Passat Polo, Touran, Luppo, Phaeton, Sharan, Tuareg, T5
Jointed glow plug socket set, 3/8", length 158mm, sizes 8, 9, 10, 12, 14, 16mm
1/2" spark plug socket, 21mm
Loosens the glow plug socket through vibration, after which the glow plug is easily removed. Four torque settings (10, 20, 30, 40Nm)
Mercedes Benz CDI Diesel Engine Glow Plug Extractor Remover and Repair 3-pieces Kit.1 pc tapered reamer hex:6x10mm, 1pc tapered reamer hex 7x13mm, 1pc glow plug extractor for glow plug threads hex 10x19mm
Fuel filter key tool, suitable for Peugeot, Citroen, Renault models with HDI engines, clamp size diameter: 108mm
Used for a variety of cars. Durable metal design in plastic storage box. With the 8pcs kit elements you can easily remove and place the longitudinal strap.
It can also be used with petrol and diesel engines. Adjustable in size from 35 to 200mm. This Universal Valve Spring Compression is suitable for compressing the valve springs in different types of engines. Chromed design.